Electric Screwdriver finest kinds of power tools will make you feel like a superhuman Things that usually take a long time to perform become considerably simpler and quicker to do. The use of an Electric Screwdriver cordless screwdriver makes quick work of any task that would normally need a manual one.
Is that a screw you’re driving into the drywall to instal a shelf? It was accomplished in a single bound. Unpacking a brand new chair and putting it together? Completed as quickly as a bullet from a gun.
After putting in many hours of study and days of testing the 10 most popular electric screwdrivers on the market, we found that the Ryobi HP44L (sold on Amazon) is the best and will provide the most superpowered-punch for a DIYer’s home improvement projects.
The Milwaukee M12 (sold at Home Depot) is our most flexible recommendation; it can do jobs that would normally need a cordless power drill.
Best Electric Screwdriver
1. Milwaukee M12 1/4″ Hex Kit 2401-22
The Milwaukee M12 delivers the torque of a bigger tool, such as a drill or impact driver, in a more compact package. It’s on the larger end of the electric screwdriver spectrum, both in terms of size and torque, allowing it to do jobs that fall beyond the scope of the testing in this guide.
For example, all the other screwdrivers tested were maxed out when utilising one-inch screws. The M12 exceeded that limit, pushing 1.5-inch screws into a wall stud.
During our subjective testing for this guide, I often grabbed the M12 screwdriver when the work was thought to be beyond the capability of other powered screwdrivers.
The Milwaukee M12 was utilised to connect a compartment door on my RV by driving small metal screws into hinge holes. To complete the task, though, I required a screwdriver with a lower physical profile—the Milwaukee M12 was too tall for the location I was working in.
2. Ryobi HP44L Quickturn
The Ryobi Quickturn HP44L is an excellent choice for a powered screwdriver that may assist with household maintenance and light-duty chores such as furniture assembly.
The Quickturn HP44L is a versatile electric screwdriver with a handle that can be used as a pistol grip (enabling the user to apply greater pressure to the tool) or as a standard straight-grip (excellent for guiding the driver into small spots).
The Quickturn HP44L is more likely to suit the area you’re working in since it can flip between these two handle configurations than screwdrivers with fixed handle positions.
The Quickturn HP44L has a switch that enables the operator to reduce the amount of torque it generates. Because this screwdriver uses less force, it is simpler to deal with screws driven into delicate materials such as a plastic power outlet cover or to prevent tearing out screws made of softer materials such as brass.
3. Hychika SD-4C
The Hychika SD-4C earns marks for its convertible handle, which effortlessly rotates from pistol grip to straight grip and locks in place in both positions. The torque provided by this tool is enough for domestic usage.
This is an electric screwdriver aimed to DIYers, therefore it’s not as well crafted as ones that are developed with tradesmen in mind. While I enjoyed the pebbled rubber grip on the SD-4C, the tool itself felt hollow and of doubtful quality.
There is no indication of how much energy is left in the Hychika, merely an LED that lights up when it is plugged in and charging, shifting from red to green when completely charged. The Hychika would be enough as an additional tool to slide into your kitchen catch-all drawer.
4. DeWalt DCF682N1
The DeWalt DCF682N1 performed well in certain areas—the screwdriver is well-balanced in terms of weight, and the handle has enough rubber to retain your hold.
This gyroscopic screwdriver, on the other hand, is everything from intuitive: I had to consult the user manual to find out how to operate it. The first movement of the screwdriver determines the direction and amount of torque for the DeWalt.
In other words, if you swiftly move the trigger to the left, the screwdriver zips anticlockwise. As someone who regularly mutters “righty-tighty” under my breath, basing the screwdriver’s orientation on my movement made it easier to operate.
If you find yourself completing the same job again and over, this is the screwdriver for you. Sometimes, I was shocked by how much force the screwdriver provided: If I had been doing anything a little delicate, like dealing with fragile plastic, I would have over-torqued and caused damage.
5. Dremel Home Solutions HSES-01
Unfortunately, Dremel’s second effort to develop an electric screwdriver is less amazing than its first, the GO-01, which held the rank of Best Overall in this guide, until it was discontinued.
The HSES-01, like the GO-01, includes a dial to adjust torque, allowing for less force when driving screws into fragile materials such as a plastic power outlet cover. The HSES-01, like the GO-01, has a MicroUSB connector. As a result, there’s no need to be concerned about the cost or availability of a proprietary charger if you ever need a replacement.
Finally, like with the GO-01, HSES-01’s motor is activated by applying downward/ forward pressure (depending on whatever direction you’re operating in,) to the screwdriver. The tool will begin to drive or remove the screw that it’s configured to, automatically. Unfortunately, despite its similarities to the GO-01, the HSES-01’s design provides enough difficulties that it cannot compete with its predecessor.
6. Metabo HPT DB3DL2
The Metabo DB3DL2 comes with two replaceable batteries and a charging station, similar to the DeWalt DCF682N1, enabling one battery to be used while another is charged. The battery is a little more finicky than the one used in the DeWalt. The Metabo battery, on the other hand, can only be placed into the tool in one direction.
The screwdriver’s torque is equivalent to tools that are marketed with contractors in mind, such as the DeWalt DCF682N1 and the Milwaukee M12. With this much strength, it can execute jobs that would be impossible for less powerful electric screwdrivers aimed at household consumers. During testing, I discovered that I could sink or remove longer screws with considerable ease.
7. Ryobi HP34L
The handle of the Ryobi HP34L has a soft, durable rubber grip that is pleasant to grasp while maintaining a firm grip on the instrument. Regardless of hand size, the HP34L’s extended two-finger trigger button will enable you to grasp the screwdriver and simply strike that button.
Unlike other screwdrivers, which have many buttons for adjusting torque or controlling a built-in LED work light, the HP34L just has one extra button for selecting direction. If you want your tools simple, then Ryobi could be for you.
8. Black & Decker LightDriver BDCSFL20C
The Black & Decker BDCSFL20C has a lot going on in the aesthetics department: being part of Black & Decker’s 4-volt MAX series, its trademark orange and black colouring with chunky grey accents seem both industrial and contemporary. Its LED task light has a huge push button behind it that allows you to switch it on and off while you work.
When picked up, however, the BDCSFL20C loses part of its brilliance. The term “electronic commerce” refers to the sale of electronic goods. The balance improves somewhat by snapping the handle from a pistol configuration to a straight posture.
The button that enables you to alter the handle’s direction features a spring that snaps noisily when the button is pushed. Often, the button took a bit of a jiggle to get it to snap into a locked position again. to.. a. The handle was comfortable considering the size, however the rubberless grip is slick.
9. Wen 49036
The Wen 49036 offers practically all of the characteristics on my wish list for an electric screwdriver: a pistol handle that converts to a straight grip, an LED for illuminating your work area, a comprehensive charge indication, and adjustable torque. Unfortunately, it isn’t very strong. Even while completing the most basic chores, I found it to be sluggish and underpowered.
Furthermore, I’m not sure whether to be pleased or disappointed by the WEN’s directional switch. It enables users to choose between screw driving and screw removal, although there is a big dead zone on the switch between these two settings.
This leads me to believe that the screwdriver is of low quality. However, the dead zone may also operate as a safeguard to protect the WEN from turning on, accidently. I’ll let you judge whether or not this is a victory.
10. Skil SD561201
The Skil scored worse than the rest of the electric screwdrivers in this guide since it was not able to sink a screw into the 2×4 without pre-drilled holes. While the tool did have some nice features its LED light stayed on a little longer than other screwdrivers, and it even has an indicator light to tell you if there’s a live circuit near the tip of the screwdriver—these features feel like they’d be better suited for specialty use, such as electronics.
This screwdriver might be beneficial if you are a user who often needs to ensure that the area you are working in has live power. We found this screwdriver to be weak when compared to similar voltage screwdrivers at comparable pricing.
Electric Screwdrivers: What You Should Know
How Drill Bits Work
Electric screwdrivers’ drill bits are the single most crucial component to grasp. To use a screwdriver effectively, you need the appropriate bit for the screw’s head. Star, slot, and flat-head are all names based on the form of the screw, while others, like the Roberts, are references to the person who invented the screw. Bits may or may not come with your electric screwdriver. Make sure you get the right bit for your screwdriver before you leave the shop or get one online.
It’s possible that the bits included with your tool set or power drill may be used in your electric screwdriver. A set of hex bits, as opposed to a hex key, might simplify the assembly of furniture, as an example. Also, if you don’t use the right bit for the job, you can end up stripping the screw head and making it hard to rethread the screw into the same hole.
There is no universally applicable bit size for screwdrivers. Bits with a 1/4-inch hex shank were utilised in the tested screwdrivers. Head on over to the hardware shop with your electric screwdriver if you are unclear as to which parts will work with it. In all likelihood, they will be delighted to assist you in making the right choices.
How to Use An Electric Screwdriver
Be sure to fully charge an electric screwdriver before using it for the first time. To acquire a feel for a new tool’s capabilities before using it for the first time, I prefer to leave it plugged in for at least 24 hours.
Instead of using a screwdriver that has a built-in battery, you should choose for one like the Dewalt DCF682N1 that has a detachable battery pack. If the screwdriver’s battery is detachable, you may purchase a spare and keep it charging while you use the tool. Furthermore, you may buy a new battery instead of a new screwdriver if the replaceable battery quits holding a charge.
The versatility of an electric screwdriver is enhanced by the ability to modify its torque settings. If the material you’re trying to fasten is delicate, you may want to lessen the torque on your electric screwdriver. By doing so, you may lessen the risk that the material you’re screwing into will be harmed.